Input your user password and press [enter – ACR Electronics Nauticast Y1-03-0211 User Manual
Page 48
Y1-03-0211 Rev D
44
3.5.3 Ship Settings (User Password Protected)
Select “Ship Settings” with cursor button [Up] & [Down] or press No. 4 on the keyboard.
NOTE: Please see Appendix 7.3 for password information
Input your User Password and press [Enter].
Scroll the Ship Settings Fields with [Enter] and input own convoy and vessel data.
NOTE: The reference point is defined by the 4 lengths A, B, C and D.
A
= the distance from bow to the antenna
B
= the distance from the antenna to the stern
C
= the distance from the port side to the antenna
D
= the distance from the antenna to the starboard side
The following example should illustrate how the fields (length and beam
– convoy and the
correct reference point) should be used.
N 1
o
23' E 0
o
16' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----| +- 8. Graphical Display Settings
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1
o
23' E 0
o
16' |1>0.01|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
User password protected!
Please enter user password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit