ACR Electronics Nauticast Y1-03-0211 User Manual
Page 64
Y1-03-0211 Rev D
60
i) Changing the MMSI / IMO / DAC / ESN Numbers
Mentioned DAC and ESN numbers are only available in Inland AIS - Mode .
Select again “Service Configuration” from the Main Menu with the cursor button [Up] &
[Down] or press No. 6 on the keyboard.
Select Submenu 3 “Change MMSI/IMO” with cursor button [Up] & [Down] by pressing No. 3
on the keyboard.
Input new MMSI / IMO Numbers and press [Save] to store input data. Press [Back] to return
to the Submenu without saving.
NOTE:
Data input is limited to 9 characters. Once you‟ve keyed in a new MMSI and pressed
the “Save” – button, the NAUTICAST will restart automatically. After restarting come back to
the “Service Configuration” Menu to complete the settings (DAC, ESN and AIS-Mode).
N 1
o
21' E 0
o
14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
-----| |
| +- 1. Change Service Password
View | +- 2. User Password Settings
| +- 3. Change MMSI / IMO
-----| +- 4. Change DAC / ESN
| +- 5. Change AIS Mode
Msg. | +- 6. Restore Factory Settings
|
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1
o
21' E 0
o
14' |1> N/A|2>0.00|3>0.10nm
********** Change MMSI / IMO ***********
MMSI :231000000
IMO No.:303174162
----------------------------------------
NUM| Save | | | Back