ACR Electronics Nauticast Y1-03-0211 - Manual (Page 65)

Y1-03-0211 Rev D 61
Select Submenu 4 “Change DAC / ESN” with cursor button [Up] & [Down] by pressing No. 4
on the keyboard.
Input new DAC / ESN Numbers and press [Save] to store input data. Press [Back] to return
to the Submenu without saving.
NOTE: The DAC (Designated Area Code) is predefined with the value “200”. Please key in
only a different 3 digit value if your authority wants you to do this. Otherwise you may lose
important AIS information. The ESN (European Ship Number) is limited to 8 ASCII
characters.
Dynamic Keys: Change MMSI / IMO
[M5] [Save]
Save MMSI/IMO
Number Input
[Enter]
Navigate Data Input
Fields (up/down)
[M8] [Back]
Return to Submenu
Service
Configuration
[Up] /
[Down]
Navigate Data Input
Fields (up/down)
N 1 o 21' E 0 o 14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
-----| |
| +- 1. Change Service Password
View | +- 2. User Password Settings
| +- 3. Change MMSI / IMO
-----| +- 4. Change DAC / ESN
| +- 5. Change AIS Mode
Msg. | +- 6. Restore Factory Settings
|
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1 o 21' E 0 o 14' |1> N/A|2>0.00|3>0.10nm
*********** Change DAC / ESN ***********
DAC : 200
ESN : A123456B
----------------------------------------
NUM| Save | | | Back