ACR Electronics Nauticast Y1-03-0211 - Manual (Page 87)

Y1-03-0211 Rev D 83
Other Settings
Inside this menu it is possible to adjust the graphical view to your demand. The available
functions cover the topics:
o AIS-target filter settings
o Enabling / disabling the Auto Zoom feature with max. number of ships
o Alarm appearance
Dynamic Keys: Other Settings
[M5] [Save] Save the settings [M8] [Back]
Return to
Graphical
Display Menu
Targets Filter
This switch [M1] provides a filter for Class A or Class B targets. Targets falling in one of
these categories will not be displayed. An icon right to the M1 button indicates which filter is
active. Pressing the [M1] button in one of the graphical views will let you toggle this filter
online.
Max Count
Sets the maximum number of displayed targets. For example a max Count of 20 displays 20
closest targets.
Auto Zoom
Is set to on, a zoom level is set automatically that the targets fit best into the display. If
during Auto Zoom the zoom level is changed manually, the Auto Zoom functionality is
interrupted for 30 minutes. Then after this time period, Auto Zoom is active again.
For Example: If you set Max Count to 20 and activate Auto Zoom, then the zoom level will be
fitted to show these 20 targets.
Show Alarms:
Minimized
In the foreground
The Minimized option shows an icon beside the M3 button if one appears. The In the
foreground option displays the alarm immediately.
N53°31 E10° 1 |1>0.69|2>0.77|3>1.08nm
******* Other Graphical Settings ********
Targets
Do not show:<------>
Max Count :20
on/off
Autom Zoom :[*]/[ ]
Show Alarms: Minimized
----------------------------------------
NUM| Save | | | Back