PHASE RESEARCH 2000 Series - Manual (Page 40)

SECTION 10 - RESET LOOP 10-1
PHASE RESEARCH
USER GUIDE
SECTION 10 - RESET LOOP
10-1 Reset Loop
THIS FEATURE REQUIRES AN ACCESS CODE FOR ENTRY
This screen lets you manually reset an internal Fast Track 2+2/386 2000 Series Timer Loop
Detector that failed to reset when the last car left. This action should rarely be required.
NOTE: Reset Loop feature should only be used when an L light is on and there is no car on a
particular detection point. Example: L4 is on, the Timer is running, but no cars are in
the drive-thru lane(s). Generally, L1 and L2
– when used for Menu and Greet – cannot
be reset from the Fast Track Timer.
From MENU Screen (see “MENU SCREEN” on page 8-1):
1. Press to move cursor to [RESET LOOP].
2. Press . You are prompted to enter an Access Code.
3. Enter your six-digit Access Code. You are now in the Reset Loop screen.
1 1 : 0 0 A M M O N F E B 2 3
R E S E T L O O P F O R :
L 1 / A / M E N U /
L 2 / A / G R E E T /
L 3 / A / W I N 1 /
L 4 / A / W I N 2 /
< A R R O W S > T O M O V E
< E N T E R > T O S E L E C T
< M A I N M E N U > T O E X I T