PHASE RESEARCH 2000 Series - Manual (Page 87)

PHASE RESEARCH
USER GUIDE
SECTION 13 - PARAMETERS PROGRAMMING 13-19
IMPORTANT:
Samples of the Printer report tapes generated by the automatic reporting
feature of the Timer are shown in “PRINTER REPORT TAPES” (Appen-
dix 1).
17. Press or to select ON (to print the PEC report as cars move
through the drive-thru) or OFF.
18. Press to move cursor immediately to the right of TARGETS.
19. Press or to select ON (to print the Targets on the reports) or
OFF.
20. Press to move cursor immediately to the right of AUTO.
21. Press or to select ON or OFF (to disable automatic reporting).
NOTE: Events that will be printed on the automatic reports must be defined by
corresponding drive-thru configurations or target settings.