PHASE RESEARCH 2000 Series User Manual
Page 55
PHASE RESEARCH
USER GUIDE
SECTION 12 - MANUAL REPORT SCREENS
12-13
6. Press
to set the dates.
7. Press
to move the cursor to [VIEW] or [PRINT] in order to send
the report to either the display or the printer. Selecting the [VIEW] or [PRINT]
option below the REPORT BY AVERAGE field will produce a single report
that averages all the selected data. The REPORT BY PERIOD [VIEW] or
[PRINT] selection will produce individual report sections for each period. The
Header for each report section indicates which dates are included in the sec-
tion.
8. Press
to produce the selected screen or printer report. The Timer will
display SEARCHING and/or PROCESSING for up to several seconds
before the report is displayed or printed.
9. Press
when viewing a screen report to display the corresponding grad-
ing report. This screen shows counts and percentages of cars that meet the cri-
teria for each letter grade.
(If you then need a printed copy of the grading report, press
.)
10. Press
to scroll through reports that have too many lines to fit on the
screen.
11. Press
to cycle through individual period reports when viewing
reports for more than one period.