Campbell Scientific AL200 ALERT2 Encoder, Modulator, and Sensor Interface User Manual
Page 35
Advertising
Appendix E. AL200 USB Driver
Installation Instructions
When plugging the AL200 into your Windows XP or Vista PC for the first
time, it may be necessary to install the FTDI Virtual COM Port (VCP) driver.
This is not required when using Windows 7 or 8.
Visit
and select the appropriate file based on
your computer’s operating system. Download the zip file to your PC and
extract the files to a directory of your choosing. Select and open the executable
file and proceed through the install wizard. After the drivers finish installing,
you should see a confirmation screen indicating that the drivers were installed
or updated successfully. You will then need to restart your computer to apply
the changes.
E-1
Advertising