AMX Mio Modero R-3 - Manual (Page 16)

Programming The Mio R-3
12 Mio Modero R-3 Remote
5. Go to Tools > Firmware Transfers > Send to Axcess Device... This opens the Send to Axcess dialog
(FIG. 5).
6. Browse to the location of the firmware file.
7. Select the file within the Files frame.
8. Click Query for Devices.
9. The Query For Devices field will display a complete list of all devices currently conn ne ct ed to NetLinx
Studio capable of accepting the firmware file selected. Select the Mio R-3.
10. Click Send.
11. After device firmware download, check one more time to verify the firmware version change.
12. Click Close.
13. Upon confirmation of a successful send, exit NetLinx Studio and disconnect the programming jack.
FIG. 5 Send to Axcess Dialog Window
You must download two .tsk files for the Mio R-3: one main firmware file, and one for
the ZigBee module.
If you are using the Mio R-3 in conjunction with other ZigBee-enabled devices, such
as the Mio R-4 and the NXA-ZGW wireless gateway, you should update the firmware
to all of the ZigBee devices at the same time.