Serial commands, Brt ^cfg – AMX Mio Modero R-3 User Manual
Page 18
Programming The Mio R-3
14
Mio Modero R-3 Remote
Serial Commands
The Mio R-3 remote supports a few commands that can be uploaded to the device using a terminal program
such as HyperTerminal. These commands are not needed for normal usage or programming of the remote.
Channel Codes (Cont.)
Button
Dev 1
Dev 2
Dev 3
Dev 4
Dev 5
Dev 6
INFO
39
79
119
159
199
239
LAST
40
80
120
160
200
240
TV (Device 1)
241
241
241
241
241
241
SAT (Device 2)
242
242
242
242
242
242
DVD (Device 3)
243
243
243
243
243
243
CD (Device 4)
244
244
244
244
244
244
AUX (Device 5)
245
245
245
245
245
245
LGHT (Device 6) 246
246
246
246
246
246
A (Macro 1)
250
250
250
250
250
250
B (Macro 2)
251
251
251
251
251
251
C (Macro 3)
252
252
252
252
252
252
Serial Commands
@BRT
Set Brightness level
This command can be used to customize the brightness of the red LEDs that
backlight the power button if the predefined brightnesses in Setup Mode are
not fine enough.
Syntax:
"'BRIT-<awake brightness level>,<sleep brightness
level>'"
Variables:
brightness level # = a value from 0 - 32.
"'@BRT-#'" (Set LED Awake brightness level)
"'@BRT-#,#'" (Set LED Awake brightness level, sleep brightness level)
Example:
(1) "'@BRT-16'"
Sets the awake brightness level to 50%.
^CFG #
Enable or Disable Debug
Mode
Syntax:
^CFG- <command value>
Variables:
• # = (1 = Debug Mode ON, 0 = Debug Mode OFF).
Example:
^CFG-1
Turn Debug Mode ON