Campbell Scientific TE525, TE525WS, and TE525MM Texas Electronics Rain Gages User Manual
Page 10
Advertising
TE525 Tipping Bucket Rain Gage
4.3 Use SCWin to Program Datalogger and Generate Wiring
Diagram
The simplest method for programming the datalogger to measure the tipping
bucket rain gages is to use Campbell Scientific’s SCWin Program Generator
(Short Cut).
This section shows Short Cut’s programming for the
TE525/TE525WS. The TE52MM is done similarly.
NOTE
1. Open
Short Cut and click on New Program.
2. Select
the
Datalogger and enter the Scan Interval.
4
Advertising