Campbell Scientific TE525, TE525WS, and TE525MM Texas Electronics Rain Gages - Manual (Page 21)

Appendix A. Edlog Program Examples
A.1 CR10X Pulse Count Example Program
The CR10X program will also work with the CR500, CR510, CR10, 21X or
CR23X. CR7 programming is similar to the CR10X but has an additional
parameter in the Pulse (P3) instruction to specify the slot that the pulse card is
in.
;{CR10X}
*Table 1 Program
01: 1.0000
Execution Interval (seconds)
1: Pulse (P3)
1: 1
Reps
2: 1 Pulse Channel 1
3: 2 Switch Closure, All Counts
4: 3 Loc [ Rain_mm ]
5: 0.254 Multiplier
6: 0 Offset
2: If time is (P92)
1: 0
Minutes (Seconds --) into a
2: 60 Interval (same units as above)
3: 10 Set Output Flag High (Flag 0)
3: Set Active Storage Area (P80)
1: 1
Final Storage Area 1
2: 101 Array ID
4: Real Time (P77)
1: 1220
Year,Day,Hour/Minute (midnight = 2400)
5: Totalize (P72)
1: 1
Reps
2: 3 Loc [ Rain_mm ]
*Table 2 Program
01: 0
Execution Interval (seconds)
*Table 3 Subroutines
End Program
A-1