Campbell Scientific VSP3 Vosponder Voice Radio Interface - Manual (Page 23)

Section 3. Developing the Voice Image File
3-5
When you have finished creating the voice image file, it can be saved by
selecting the “Save” icon located on the upper left side of the screen (picture of
a disk). You should give each image a unique name and save it to floppy disk
or to your computer’s hard drive. The voice image file will need to be
uploaded to the Vosponder, so saving it someplace that is easy to find is a good
idea.
Close out of the Voice Image Development Software simply by closing your
browser.
3.3.2 Editing the Voice Image File
If you need to make changes to an existing voice image file, you can do so by
first selecting the “Open” icon from the main screen (picture of a folder).
You can now add, delete, edit, or move a phrase.
Add a Phrase
To add phrases select the “Add Phrase” icon from the upper left side of the
screen (picture of a plus sign). The “Add Phrase” screen will appear and you
can make modifications as desired. Once all the modifications are completed
select “Close”.
Edit a Phrase
To edit a phrase select it by double-clicking on the phrase to be edited. The
“Add a Phrase” screen will appear with the text and setting for the current
phrase. Make any modifications and then select “Close”.