Campbell Scientific VSP3 Vosponder Voice Radio Interface - Manual (Page 27)

Section 4. Vosponder Configuration and Programming
4-3
See Appendix D for a complete diagram of the Vosponder menu tree.
At any prompt, entry of an <ESC> will abort the command and/or move back
one menu level. If at the main menu, <ESC> will return the Vosponder to its
runtime mode.
At each prompt a 10-second timeout feature is provided that will abort the
command and/or move back one menu level if no activity on the keyboard
happens in this time period. Ultimately the unit will return to the runtime
mode from any menu level or command prompt if there is 60 seconds of
inactivity on the keyboard.
From this point in the manual you can continue on through Section 4.2 and
familiarize yourself with each of the menus and commands. Or you can skip to
Section 4.3 and start setting up the Vosponder while using this section as a
reference as you work your way through the setup process shown in Section
4.3.
4.2.1 Main Menu Commands
A description of each main menu command follows. Letters that are bolded on
the screen shots are examples of what the user would enter to progress through
the Vosponder’s menu tree.
R - Reset System
. This command executes a cold reset. It restores all
parameters to the factory defaults including the SDI-12 mode, voice image file,
and test data values. A confirmation of “Y” is required to complete the reset
command. You must enter a “Y” and then press <ENTER> in order for this
command to take affect. When the “Reset” is complete the Vosponder will
return to the main menu M:>.
DACOM Technologies, Inc. 435-755-0300
www.dacomtechnologies.com
13DACOMTEC VSP3_010*034C*EU2025
M:>R
M:>!! *CONFIRM RESET* !! (Y)
V- View
. Allows the user to see the following parameters (for more details
see Section 4.2.1):
• DTMF digits received
• Voice image ID
• Two-way radio transmit hang time, delay, and channel busy sense settings
• Data last transferred to the Vosponder from the datalogger
• SDI-12 address and DTMF code assignments