Campbell Scientific VSP3 Vosponder Voice Radio Interface - Manual (Page 28)

Section 4. Vosponder Configuration and Programming
4-4
M:>V
(D)TMF
(I)mage
(T)X
(A)ddr
Data (V)alues
(ESC)
V:>
E - Edit
. Allows user to edit the following parameters (for more details see
Section 4.2.2):
• DTMF Code
• SDI-12 Address
• SDI-12 Mode
• Transmit Settings
M:>E
(D)TMF Code
(S)DI-12 Adr
SDI-12 (M)ode
(T)x
(ESC)
E:>
S - Speak Now
. Speaks the most recent data values using the current
voice image file. If a radio is attached to the Vosponder and a handset is
turned on and listening on the same frequency as remote sites radio, the user
will hear the voice message.
M:>S
S:>
A - Speak Alarm
. Speaks the currently loaded alarm text. (Not used in
this version.)
T - Talk Keyed Entry
. This allows the user to enter a “pass-through”
mode that sends text entered from the keyboard directly to the Vosponder’s
speech module. In the example screen below, the user typed in “THIS IS A
TEST” then pressed <ENTER>. The Vosponder would immediately broadcast
this message over the radio link.
If you have any question about how the Vosponder will speak a word or a
symbol, this feature will allow you to test those text strings before you program
them into a voice image file.
M:>T
T:>THIS IS A TEST