Program datalogger and generate wiring diagram – Campbell Scientific WINDSONIC 2-D Sonic Wind Sensors User Manual
Page 12
Advertising
WindSonic Two-Dimensional Sonic Anemometer
4.3 Use Short Cut Program Generator for Windows (SCWin)
to Program Datalogger and Generate Wiring Diagram
The simplest method for programming the datalogger to measure the
WindSonic is to use Campbell Scientific’s SCWin. This section provides
information about using Short Cut with the WindSonic4. See Section 7,
Operation, for WindSonic1 programming information and additional
WindSonic4 programming information.
1. Open Short Cut and click on New Program.
2. Select the datalogger and enter the scan interval.
4
Advertising