8 hardware monitor, Rtc alarm date [0, 5000 series cpu – Asus Motherboard DSBF-DE/SAS User Manual
Page 101
ASUS DSBF-DE Series
4-31
The following items appear only if you enable the
Power On By RTC Alarm
item.
RTC Alarm Date [0]
To set the date of alarm, highlight this item and press <Enter> to display a date
chart. Press <+> or <-> to change scroll through the options, then press <Enter>
when done. The default setting [0] is equivalent to everyday alarm.
Configuration options: [0] [1] ~ [31]
RTC Alarm Date [00 : 00 : 00]
To set the time of alarm:
1. Press <+> or <-> to set the desired value.
2. Use the left/right arrow key or press <Tab> to move to the next field.
3. Press <Enter> when done.
F1
Help
↑↓
Select Item
-/+
Change Values
F9
Setup Defaults
ESC
Exit
→←
Select Menu
Enter
Select Sub-Menu
F10
Save and Exit
Item Specific Help
To select the fan speed
control model.
Hardware Monitor
CPU1 Domain 0 Temperature
39
o
C/102
o
F
CPU1 Domain 1 Temperature
29
o
C/84
o
F
CPU2 Domain 0 Temperature
0
o
C/32
o
F
CPU2 Domain 1 Temperature
0
o
C/32
o
F
SYSTEM1 Temperature
39
o
C/102
o
F
SYSTEM2 Temperature
29
o
C/84
o
F
CPU_FAN1 Speed
2925 RPM
CPU_FAN2 Speed
N/A
FRN_FAN1 Speed
N/A
FRN_FAN2 Speed
N/A
FRN_FAN3 Speed
N/A
FRN_FAN4 Speed
N/A
REAR_FAN1 Speed
N/A
REAR_FAN2 Speed
N/A
Smart Fan Control
[Smart Fan II]
PhoenixBIOS Setup Utility
Advanced
4.4.8
Hardware Monitor
This menu shows the hardware monitor configuration settings. Select an item then
press <Enter> to display the configuration options.
The following screens appear when you install Intel
®
5000 series CPU.