Asus Motherboard DSBF-DE/SAS User Manual
Page 160
5-46
Chapter 5: RAID configuration
4. The
Select New Array Type screen apprears.
Use the arrow keys to select
Create IS Volume, then press <Enter>.
5. The
Create New Array screen shows the disks you can add to make up
the IS volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Select New Array Type -- SAS1068
Create IM Volume
Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create IME Volume
Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL DATA
on array disks will be DELETED!
Create IS Volume
Create Integrated Striping array of
2 to 8 disks.
ALL DATA
on array disks will be DELETED!
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Select disk for array or hot spare C = Create array
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Create New Array -- SAS1068
Array Type: IS
Array Size(MB): 102996
Slot Device Identifier RAID Hot Drive Pred Size
Num
Disk Spr Status Fail (MB)
0
SEAGATE ST373454SS 0003
[Yes]
[NO] ------- ---- 70007
1
SEAGATE ST373454SS 0003
[NO]
[NO] ------- ---- 70007
2
SEAGATE ST373454SS 0003
[Yes]
[NO] ------- ---- 35003
3
SEAGATE ST373454SS 0003
[Yes]
[NO] ------- ---- 35003