Asus Motherboard DSBF-DE/SAS User Manual
Page 140
Advertising
-
Chapter 5: RAID configuration
Using the Objects command
To check data consistency using the
Objects command:
1. From the
Management Menu, select Objects, then select Logical Drive
from the menu.
2. Use the arrow keys to select the logical drive you want to check, then press
<Enter>.
3. Select
Check Consistency from the pop-up menu, then press <Enter>.
4. When prompted, use the arrow keys to select
Yes from the dialog box to
check the drive.
5. When checking is complete, press any key to continue.
Advertising