Asus Motherboard DSBF-DE/SAS - Manual (Page 194)

-0 Chapter 6: Driver installation
6.3.2 Red Hat/SuSE Linux
Follow these instructions when installing the Intel ® LAN controller base driver for
the in Red Hat ® and SuSE Linux operating system.
Before installing the LAN driver:
Before installing the LAN driver, you must install the kernel development
application. To install the kernel development:
1. Insert the Linux OS installation CD Disk 1 to the optical drive.
2. Double click “
Application” > “System setting” > “Add / Remove
application”.
3. Select “ Kernel Development” from the Development Tools.
4. Follow the later steps and add different CDs according to the instructions
displayed.
Building the driver from the TAR file:
1. Insert the motherboard/system support CD to the optical drive and mount the
optional drive in the Linux platform.
2. Copy the base driver tar file from the motherboard/system support CD to the
directory of your local hard disk. The name format of driver file is “ e1000-
<Version>.tar.gz”.
For example: the file name of driver version 7.0.38 is “ e1000-7.0.38.tar.gz”.
• The Intel ® LAN driver for Linux OS is located in:
\Drivers\INTEL 82563EB\PRO1000\LINUX
3. Untar or unzip the archive.
tar zxf e1000-x.x.x.tar.gz
4. Change to the driver src directory.
cd e1000-x.x.x/src/
5. Use the command “makeinstall” to compile the driver module.
makeinstall
6. After reboot the system, please refer to Linux distribution documentation to
configure the network protocol and IP address.