Athena Technologies 6050 - Manual (Page 3)

Display update rate: 5 times per second
Filtering: Analog and digital filtering
techniques increase stability
of process and display.
°F/°C:
output:
-B Relay (time
proportioning)
-F Current
proportional
-S Pulsed voltage
-T Triac time
proportional
Filtered LED display:
T/C linearization:
Connections:
Dimensions:
Mounting:
Weight:
Internal switch selection--
process, set point.
Heating only
SPST relay 7 Amps resistive at
120 Vac, 5 amp resistive at 240 Vac,
50 VA inductive.
4-20mADC into 500 Ohm max. For driving
SCR power controllers.
20 Vdc pulsed time proportioning
signal for driving solid state relays.
Solid state plug-in triac output.
Rated 1 Amp holding & 10 amps inrush.
4 digits for process, 4 digits for
parameters.
Continuously calculated and updated
using rom based algorithm.
Inputs and outputs via barrier strips
with U.L. approved locking terminals.
Front panel: 96mm X 96mm X 22mm
Case: 92mm X 92mm X 118mm
Depth behind panel: 96mm (approx.
minus panel thickness)
Channel slides and screws
2 lb
2