Alpine F1 STATUS PXI-H990 - Manual (Page 103)

99
- EN
A. PROC.
RETURN
MENU
SETUP
ENTER/
Joystick
/
Equalizer adjustment (when DVI-9990/TMI-
M990 is connected)
When using the (DVI-9990) head unit and the (TMI-M990) monitor (both sold separately) in the
system (page 32), EQ adjustments are reflected in the data on the head unit’s and monitor’s displays.
The operation is from the remote control supplied
with the head unit. Switch the selector switch on the
rear side of the remote control to H/U.
1
Check that the head unit defeat mode is OFF.
2
Press and hold A. PROC. for more than 3 seconds.
3
Select “EQ SETUP” with the Joystick , and press ENTER.
4
Select “Graphic E.Q” or “Parametric E.Q” with the Joystick , and press
ENTER .
Only Graphic Equalizer or Parametric Equalizer can be valid.
5
Select “SETUP” with the Joystick , and press ENTER.
See page 100 for “GRAPHIC EQ adjustment”.
See page 102 for “PARAMETRIC EQ adjustment”.