Alpine F1 STATUS PXI-H990 - Manual (Page 49)

45
- EN
13
Press 1 ( ) or 5 ( ), select “LOW.SL [Low
Pass Slope]” or “HI.SL [High Pass Slope]”,
then press 2 (ENT).
14
Press 1 ( ) or 5 ( ), adjust the slope, then
press 2 (ENT).
15
Press 1 ( ) or 5 ( ), select “LEVEL [Level]”,
then press 2 (ENT).
16
Press 1 ( ) or 5 ( ), adjust the level
(–12dB~0dB, 1dB steps), then press 2 (ENT).
17
Press 1 ( ) or 5 ( ), select “PHASE [Phase]”,
then press 2 (ENT).
18
Press 1 ( ) or 5 ( ), switch the phase, then
press 2 (ENT).
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Continued
0
°
180
°
ADJ ( F WF L )
LOW. SL OFF
ADJ ( F WF L )
LEVEL
0
dB
ADJ ( F WF L )
PHASE
0
ADJ ( F TW L )
Low Pass Freq 20KHz
Low Pass Slope OFF
High Pass Freq 1KHz
High Pass Slope -18dB/oct
Level 0dB
Phase 0
ADJ ( F TW L )
Low Pass Freq 20KHz
Low Pass Slope OFF
High Pass Freq 1KHz
High Pass Slope -18dB/oct
Level 0dB
Phase 0
ADJ ( F TW L )
Low Pass Freq 20KHz
Low Pass Slope OFF
High Pass Freq 1KHz
High Pass Slope -18dB/oct
Level 0dB
Phase 0