Alpine F1 STATUS PXI-H990 - Manual (Page 42)

38
- EN
Settings/Adjustments
16
Press 1 ( ) or 5 ( ), select the mode “FREQ
[Frequency]”, then press 2 (ENT).
17
Press 1 ( ) or 5 ( ), select the frequency,
then press 2 (ENT).
For the adjustable frequencies, see page 109.
• It is not possible to adjust the frequencies of adjacent
bands within 4 steps.
18
Press 1 ( ) or 5 ( ), select “Q [Q-Factor]”,
then press 2 (ENT).
19
Press 1 ( ) or 5 ( ), select the bandwidth “Q”,
then press 2 (ENT).
The bandwidth can be adjusted in six steps:
0.5, 1, 2, 3, 4 and 5
○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Parametric Equalizer Adjustments (continued)
ADJ ( BAND 1 )
FREQ 28 Hz
ADJ ( BAND 1 )
Q 0. 5
ADJ ( BAND 1 )
Frequency 31.5Hz
Q-Factor 0.5
Level 1.5dB
ADJ ( BAND 1 )
Frequency 31.5Hz
Q-Factor 0.5
Level 1.5dB