Alpine F1 STATUS PXI-H990 - Manual (Page 68)

64
- EN
Using the multi-channel function
3
Press 1 ( ) or 5 ( ), select “AP SETUP”, then
press 2 (ENT).
4
Press 1 ( ) or 5 ( ), select “MULTI.CH.MGR
[Multi Channel Manager]”, then press
2 (ENT)
.
5
Press 1 ( ) or 5 ( ), select “C.BASS SPLIT
[Center Bass Split]”, then press 2 (ENT).
6
Press 1 ( ) or 5 ( ), select “MODE ON/OFF
[Center Bass Split ON/OFF]”.
7
When OFF, press 1 ( ) after pressing
2 (ENT)
to switch ON.
To switch from ON to OFF, press 5 ( ) after
pressing 2 (ENT).
When ON is set, the audio signal from the
front L/R can be mixed with the center audio
signal (low range).
○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Mixing the Bass Sound of the Center Channel with the Sound of the Front
Left and Right Channels (C.BASS SPLIT) (continued)