Samsung NP940X3G-S02US - Manual (Page 56)

Basics
56
6
Enter the password again to confirm it and select Ok.
7
Select Save → Yes to save and restart.
• To enable the Password on boot option, set a
Supervisor Password and enter the password when
starting up the computer.
• To change the HDD Password after setting it, restart
the computer.
• For some models, when the password entered message
appears in the Setup Notice window, select Ok to
complete the setup.
Setting a boot password
1
Turn on the computer.
2
Before the Samsung logo appears, press the F2 key several
times.
3
Access the Security menu.
4
Select a password type (Supervisor Password, User
Password, or HDD Password).
If you cannot select an item or the HDD Password Frozen
message appears, restart the computer. Then, press the F2 key
several times before the Samsung logo appears to enter the
BIOS setup screen.
5
Enter a password and select Ok.
The password can be up to 20 characters.