Samsung NP940X3G-S02US - Manual (Page 61)

Network & Internet
61
Wake on LAN (WOL) feature
Activate the system remotely from sleep mode when a signal,
such as a ping or magic packet command, is received via a wired
LAN.
1
On the desktop, open the Charms and select the Settings
charm
→ Control Panel → Network and Internet →
Network and Sharing Center → Change adapter settings.
2
Right-click Ethernet and select Properties.
3
Select Configure… → Power Management → Allow this
device to wake the computer → OK.
4
Restart the computer.
• If the computer wakes up from sleep mode inadvertently,
disable the Wake on LAN feature.
• This feature may not work while using other power saving
features. To disable other sleep functions, select the
Settings charm
→ Control Panel → Hardware and Sound
and then set Power Options.
6
Configure the IP settings.
• When using DHCP, select Obtain an IP address
automatically.
• When not using DHCP, contact the network administrator
for the IP address. To use a static IP address, select Use the
following IP address and set the IP address manually.
7
Select OK to save the settings.