Samsung LN19D450G1DXZA - Manual (Page 171)

◀ ▶
English
Problem Possible Solution
I want to start
Anynet+.
●
Check if the Anynet+ device is properly connected to the TV
and check if the
Anynet+ (HDMI-CEC) is set to On in the
System menu.
●
Press the TOOLS button to display the Anynet+ menu and
select a menu you want.
I want to exit
Anynet+.
●
Select View TV in the Anynet+ menu.
●
Press the SOURCE button on the TV remote control and select
a device other than an Anynet+ device.
●
Press > CH < to change the TV mode. (Note that the
channel button operates only when a tuner-embedded Anynet+
device is not connected.)