Samsung LN19D450G1DXZA - Manual (Page 22)

◀ ▶
English
6. Select STD , HRC , or IRC , and then press ENTERE.
7. Repeat for Analog Cable System .
8. Select Search or Next , and then press ENTERE. Auto Program starts.
N After all the available channels are stored, Auto Program removes scrambled
channels. When done, the Auto Program menu then reappears.This process
can take up to 30 minutes
How to Stop Auto Programming
1. Press the ENTERE button.
2. A message will ask
Stop Auto Program? Select Yes by pressing the š or ™
button.
3. Press the ENTERE button.