Samsung LN19D450G1DXZA - Manual (Page 60)

◀ ▶
English
4. In the top entry field, press ENTERE, and then set IP Mode to Manual .
5. Press the ▼ button on your remote control to go to the IP Address entry
field, and then press ENTERE.
6. Enter the first portion of the IP Address (for example, 105) into the first entry
field using the number keys on your remote control. Press the right arrow
button to go to the next field.
7. Enter the next portion of the IP Address. Press the right arrow button to go
to the next field.
8. Repeat the entry process for each field in the IP Address.
N If you make a mistake when entering a number, re-enter the number to
correct it. You can also press the up or down arrow button to change the
number one unit at a time.