Samsung LN19D450G1DXZA - Manual (Page 172)

◀ ▶
English
Problem Possible Solution
The message
‘
Connecting
to Anynet+
device...
’
appears on the
screen.
●
You cannot use the remote control when the TV is in the
process of configuring Anynet+ or switching to a view mode.
●
Use the remote control after the TV has finished Anynet+
configuration or has finished switching to Anynet+.
The Anynet+
device does not
play.
●
You cannot use the play function when Plug & Play (initial
setup) is in progress.