Auto program – Samsung LN19D450G1DXZA User Manual
Page 21
Advertising
◀
▶
English
■
Auto Program
Scans for channels automatically and stores them in the TV’s memory.
To start
Auto Program
, follow these steps:
1. Push MENUm →
Channel
→ ENTERE on your remote control.
2. Select
Auto Program
, and then press ENTERE.
3. Select
Air
or
Cable
or both by highlighting and then pressing ENTERE.
N
If you selected
Air
or
Cable
or both on the Antenna screen, your choice
will already be selected.
4. Select
Search
or
Next
, and then press ENTERE.
5. If you selected
Cable
, the Cable System screen appears. Select
Digital
Cable System
, and then press ENTERE.
N
If you selected
Air
only,
Auto Program
starts.
Advertising
This manual is related to the following products: