Samsung LNR408DX-XAA - Manual (Page 15)

English- 9
C O N N E C T I O N S
Connecting to a Cable Box that Descrambles All Channels
1
Find the cable that is
connected to the
ANT OUT terminal
on your cable box.
This terminal might be labeled
“ANT OUT”, “VHF OUT” or
simply, “OUT”.
2
Connect the other end
of this cable to the
ANT 1 IN(CABLE)
terminal on the back
of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of RF cable. (These items are available at most electronics stores.)
1
Find and disconnect
the cable that is
connected to the
ANT IN terminal
on your cable box.
This terminal might be labeled
“ANT IN”, “VHF IN” or simply, “IN”.
2
Connect this cable
to a two-way splitter.
3
Connect an RF
cable between an
OUTPUT terminal on
the splitter and the IN
terminal on the cable
box.
ANT IN ANT OUT
ANT 1 IN
(CABLE)
ANT IN
Incoming
cable
Splitter
Incoming
cable
Splitter
Cable Box
01 BN68-00803A-00Eng.qxd 1/5/05 8:54 PM Page 9