Samsung LNR408DX-XAA - Manual (Page 19)

English- 13
3
Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
AV IN [S-VIDEO] jack
on the TV.
An S-Video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)
* Each external input source device has a different back panel configuration.
1
To begin, follow
steps 1–3 in the
previous section to
connect the antenna
or cable to your
VCR and your TV.
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
2
Connect an audio
cable between the
AUDIO OUT jacks on
the VCR and the
AV IN [R-AUDIO-L]
jacks on the TV.
C O N N E C T I O N S
S-Video Cable (Option)
Audio Cable (Option)
TV Rear Panel
RF Cable
VCR Rear Panel
Audio Cable (Option)
TV Rear Panel
RF Cable
VCR Rear Panel
TV Rear Panel
RF Cable
VCR Rear Panel
01 BN68-00803A-00Eng.qxd 1/5/05 8:54 PM Page 13