Samsung LNR408DX-XAA - Manual (Page 9)

English- 3
G E N E R A L I N F O R M AT I O N
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see pages 7-17.
PC IN
Connect to the video and audio output jack
on your PC.
HEADPHONE JACK
Connect a set of external headphones for
private listening.
AUDIO OUT
Connect to the audio input jack on your
Amplifier/Home theater.
Anynet OUTPUT
Refer to “Anynet AV Owner’s Instructions”.
SERVICE
Connector for service only.
COMPONENT IN
Connect component video/audio from a
DVD/Set-top box.
AV IN
Video and audio inputs for external
devices, such as a camcorder or VCR.
S-VIDEO IN
Video inputs for external devices with an
S-Video output, such as a camcorder or
VCR.
OPTICAL DIGITAL AUDIO
OUT
Connect to a Digital Audio component.
HDMI/DVI IN
Connect to the HDMI jack of a device with
HDMI output. Use the HDMI/DVI
terminal for DVI connection to an
external device. You should use the
DVI to HDMI cable or DVI-HDMI
Adapter (DVI to HDMI) for the connection,
and the 'R -AUDIO -L' terminal on DVI-IN for
sound output.
- HDMI/DVI IN terminal does not support PC.
- No sound connection is needed for an
HDMI to HDMI connection.
ANT IN
Connect to an antenna or to a cable TV
system. (See page 7~10)
CABLE CARD
Insert the cableCARD into the slot.
POWER INPUT
Connect the supplied power cord.
KENSINGTON LOCK
Refer to “Using the Anti-Theft Kensington
Lock” on page 111.
Speaker Audio Out
RF AV, S-Video Component, PC, HDMI RF AV, S-VIDEO Component, PC, HDMI
Internal Mute Off Speaker Output Speaker Output Speaker Output Sound Output Sound Output Sound Output
Internal Mute On Mute Mute Mute Sound Output Sound Output Sound Output
Video No Signal Mute Mute Mute Mute Sound Output Sound Output
When “Internal mute” is set to “On”, Sound menus except “Multi-Track Options” and “Digital Output” cannot be adjusted.
01 BN68-00803A-00Eng.qxd 1/7/05 9:24 AM Page 3