Samsung LNR408DX-XAA - Manual (Page 18)

English- 12
C O N N E C T I O N S
4
Connect an audio
cable between the
AUDIO OUT jacks on
the VCR and the
AV IN [R-AUDIO-L]
jacks on the TV.
5
Connect a video
cable between the
VIDEO OUT jack on
the VCR and the
AV IN [VIDEO] jack
on the TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
* Each external input source device has a different back panel configuration.
If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook
up to the right and left audio input jacks of the TV. If your VCR is stereo, you must
connect two cables.
TV Rear Panel
RF Cable
Audio Cable (Option)
VCR Rear Panel
TV Rear Panel
RF Cable
Audio Cable (Option)
VCR Rear Panel
Video Cable (Option)
01 BN68-00803A-00Eng.qxd 1/5/05 8:54 PM Page 12