Samsung LNR408DX-XAA - Manual (Page 17)

English- 11
C O N N E C T I O N S
3
Connect an RF cable
between the
ANT OUT terminal
on the VCR and the
ANT 1 IN (CABLE)
or ANT 2 IN (AIR)
terminal on the TV.
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 7-10).
Skip step 1 if you have not yet connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the
back of the TV.
2
Connect the cable or
antenna to the
ANTENNA IN terminal
on the back of the
VCR.
VCR Rear Panel
Incoming Cable
or Antenna
TV Rear Panel
RF Cable
VCR Rear Panel
ANT IN
TV Rear Panel
RF Cable
VCR Rear Panel
01 BN68-00803A-00Eng.qxd 1/5/05 8:54 PM Page 11