Samsung SC-DC165-XAA - Manual (Page 35)

4
Move OK Select MENU Exit
Camera Mode
►System
Clock Set
Beep Sound
Language
Demonstration
►On
►English
►On
6
Move OK Select MENU Exit
Off
On
Camera Mode
►System
Clock Set
Beep Sound
Language
Demonstration
7
SAMSUNG Camcorder is ...
[Digital Camcorder]
Demonstration
ENGLISH
35
Initial Setting: System Menu Setting
Viewing the Demonstration (Demonstration)
 The Demonstration function may only be used in the Camera
Mode with no disc inserted in the unit. page 26
 Before you begin: Make sure that there is no disc inserted in the
DVD Camcorder. page 40
 Demonstration automatically shows you the major functions that
are included with your DVD Camcorder so that you may use them
more easily.
 The Demonstration operates repeatedly until it
is switched off.
1. Set the [Mode] switch to [DISC].
2. Set the [Power] switch to [ (Camera)].
3. Press the [MENU] button.
 The menu list will appear.
4. Move the [Joystick] up or down to select
<System>, then press the [Joystick(OK)].
5. Move the [Joystick] up or down to
select <Demonstration>, then press the
[Joystick(OK)].
6. Move the [Joystick] up or down to select
<On>, then press the [Joystick(OK)].
7. Press the [MENU] button.
 The Demonstration will begin.
8. To quit the Demonstration, press the [MENU]
button.
Note
When you press FADE, BLC, EASY.Q, MF/AF, or
COLOR NITE button during the Demonstration
operation, the Demonstration function will be
deactivated and the function of the button pressed
will be activated.
臺 灣
起始設定：系統選單設定
觀賞示範畫面（Demonstration）

 Demonstration 功能僅限用於 Camera Mode 下，同時攝錄放影
機無插入光碟。 第 26 頁

 開始使用之前：請確定 DVD 攝錄放影機中並未插入光碟。

第 40 頁

 示範畫面將自動顯示 DVD 攝錄放影機中的主要功能，讓您可以更
輕鬆地使用這些功能。

 示範畫面會重複操作直到關閉示範畫面
模式。
1. 設定 [Mode] 開關為 [DISC]。
2. 設定 [Power] 開關為 [ (Camera)]。
3. 按下 [MENU] 按鈕。

 選單清單將會顯示。
4. 向上或向下移動 [Joystick] 以選擇
<System>，然後按 [Joystick(OK)]。
5. 向上或向下移動 [Joystick] 以選
擇 <Demonstration>，然後按
[Joystick(OK)]。
6. 向上或向下移動 [Joystick] 以選擇
<On>，然後按 [Joystick(OK)]。
7. 按下 [MENU] 按鈕。

 示範畫面將會開始。
8. 若要結束示範畫面，請按下 [MENU] 按鈕。
附註
當您在示範操作時按下 FADE、BLC、EASY.Q、
MF/AF 或 COLOR NITE 按鈕，示範功能將停
用，並且按下按鈕的功能將啟用。