Samsung SC-DC165-XAA - Manual (Page 93)

4
Move OK Select MENU Exit
M.Cam Mode
►Memory
Photo Quality
File No.
►Super Fine
►Series
6
Move OK Select MENU Exit
Series
Reset
M.Cam Mode
►Memory
Photo Quality
File No.
ENGLISH
93
Digital Still Camera Mode
Setting the File Number (File No.)
 File Number setting works only in M.Cam Mode. page 26
 File Numbers are given to images in the order they were recorded
when they are stored on the Memory Card.
 File numbers may be set as follows:
- <Series>: When there are existing files, the new image will be
named as the next number in the sequence.
- <Reset>: When there are no files stored on the Memory Card,
the file numbering starts from 0001.
1. Set the [Mode] switch to [CARD].
2. Set the [Power] switch to [ (Camera)].
3. Press the [MENU] button.
 The menu list will appear.
4. Move the [Joystick] up or down to select
<Memory>, then press the [Joystick(OK)].
5. Move the [Joystick] up or down to select
<File No.>, then press the [Joystick(OK)].
6. Move the [Joystick] up or down to select the
desired option ( Series or Reset), then press
the [Joystick(OK)].
 The selected option is applied.
7. To exit, press the [MENU] button.
臺 灣
數位靜態相機模式
設定檔案編號（File No.）

 檔案編號設定僅限在 M.Cam Mode下操作。第 26 頁


 將為影像提供檔案編號以便在儲存到記憶卡上時記錄。


 檔案編號可設定如下：
- <Series>：當存在現有檔案時，新影像將會按下一個數字順序
命名。
- <Reset>：當記憶卡中沒有已儲存的檔案時，檔案的編號將從
0001 開始。
1. 設定 [Mode] 開關為 [CARD]。
2. 設定 [Power] 開關為 [ (Camera)]。
3. 按下 [MENU] 按鈕。


 選單清單將會顯示。
4. 向上或向下移動 [Joystick] 以選擇
<Memory>，然後按 [Joystick(OK)]。
5. 向上或向下移動 [Joystick] 以選擇
<File No.>，然後按 [Joystick(OK)]。
6. 向上或向下移動 [Joystick] 以選擇想要
的選項（Series 或 Reset），然後按下
[Joystick(OK)]。

 所選的選項將會套用。
7. 若要退出請按 [MENU] 按鈕。