Samsung SC-DC165-XAA - Manual (Page 43)

1
4
2
3 5
REC 
30 min
SP -RW
VR
0:00:20
001
ENGLISH
43
DVD Camcorder: Basic Recording
Making your First Recording
1. Connect a power source to the DVD
Camcorder. pages 21, 25
 (A Battery Pack or a AC Power
adapter)
 Insert a disc. page 40
2. Remove the Lens Cover.
3. Open the LCD Screen.
 Set the [Mode] switch to [DISC].
 Set the [Power] switch to
[ (Camera)].
Make sure that <STBY> is
displayed.
 Make sure the image you want
to record appears on the LCD
Screen or Viewfinder.
 Make sure the Battery Level
indicates that there is enough
remaining power for your expected
recording time.
4. To start recording, press the [Start/Stop] button.
 <REC> is displayed on the LCD Screen.
The record mode, recording time, the disc type,
the format mode, and the title scene number are
displayed on the LCD Screen.
5. To stop recording, press the [Start/Stop] button again.
 <STBY> is displayed on the LCD screen after blinking.
 If you press the [Start/Stop] button to record again, a
new title scene will be created.
The title scene number will not appear in the STBY
mode but in the REC mode.
Notes
 Playing title scenes. page 63
 Up to 253 title scenes can be created on DVD-R/+RW/+R DL/-RW(Video
Mode)discs, and up to 999 on DVD-RW(VR Mode).
 Detach the Battery Pack when you have finished recording to prevent
unnecessary battery power consumption.
 If the power cable/batteries are disconnected, or recording is disabled during
recording, an error message will appear and the system is switched to the data
recovery mode. While data is being recovered, no other function is enabled. After
data recovery, the system will be switched to the STBY mode.
臺 灣
DVD 攝錄放影機：基本錄製
進行您的第一次錄製


1. 將電源連接到 DVD 攝錄放影機。

第 21,25 頁

 （電池組或交流電源適配器）

 插入光碟。
第 40 頁
2. 取下透鏡蓋。
3. 打開 LCD 螢幕。

 設定 [Mode] 開關為 [DISC]。

 設定 [Power] 開關為
[ (Camera)]。
確定 <STBY> 顯示。

 確定您要錄製的影像出現在 LCD
螢幕或觀景窗上。

 確定電池電量表示尚有足夠的剩
餘電量可供預計錄製時間使用。
4. 若要開始錄製，請按 [Start/Stop]
按鈕。

 <REC> 會顯示於 LCD 螢幕
上。錄製模式、錄製時間、光碟
類型、格式化模式和標題編號會
顯示在 LCD 螢幕上。
5. 若要停止錄製，請再次按 [Start/Stop] 按鈕。


 <STBY> 閃爍後顯示於 LCD 螢幕上。

 如果按下 [Start/Stop] 按鈕再次開始錄製，新的
標題清單將被建立。
標題清單號不會顯示在待機模式，而會顯示在錄
製模式下。
附註
 播放標題場景。 
第 63 頁
 可在 DVD-R/+RW/+R DL/-RW(Video Mode) 光碟中建立多達 253 個標
題場景，而 DVD-RW(VR Mode) 則多達 999 個。

 在您完成錄製時取出電池組，以避免不必要的電池耗電。

 如果拔下電源線或電池，或者錄製時中途取消，一則錯誤訊息會顯示
並且系統會切換為資料還原模式。資料還原進行時，無法使用其他功
能。 資料還原後，系統會切換至待機模式。