Samsung SCX-8128NA-XAA - Manual (Page 87)

Scanning_ 87
4. For MAC OS X 10.4 ~10.5
Click Devices and click Browse Devices.
For MAC OS X 10.6
Select your device below SHARED. Skip to step 6.
5. For Mac OS X 10.4
Select your machine in Twain devices option. Make sure that Use
TWAIN software checkbox is checked, and click Connect.
• If a warning message appears, click Change Port.. to select port.
• If TWAIN UI appears, from the Preference tab, click Change Port..
to select port.
For Mac OS X 10.5
Make sure that Connected checkbox is checked beside your machine in
Bonjour Devices.
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps
above.
6. Set the scan options on this program.
7. Scan and save your scanned image.
• For more information about using Image Capture, refer to the
Image Capture’s help.
• Use TWAIN-compliant softwares to apply more scan options.
• You can also scan using TWAIN-compliant software, such as
Adobe Photoshop.
• If scanning does not operate in Image Capture, update Mac OS to
the latest version. Image Capture operates properly in Mac OS X
10.4.7 or higher.
Linux scanning
You can scan a document using the Unified Driver Configurator window.
Scanning
1. Double-click the Unified Driver Configurator on your desktop.
2. Click the
button to switch to Scanners Configuration.
3. Select the scanner on the list.
If you use only one device and it is connected to the computer and
turned on, your scanner appears on the list and is automatically
selected.
If you have two or more scanners connected to your computer, you can
select any scanner at any time. For example, while acquisition is in
progress on the first scanner, you may select the second scanner, set
the device options and start image acquisition simultaneously.
4. Click Properties.
5. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
6. From the Scanner Properties window, click Preview.
The document is scanned and the image preview appears in the
Preview Pane.
7. Drag the pointer to set the image area to be scanned in the Preview
Pane.
8. Change the scan options in the Image Quality and Scan Area sections.
• Image Quality: This option allows you to select the color
composition and the scan resolution for the image.
• Scan Area: This option allows you to select the page size. The
Advanced button enables you to set the page size manually.
If you want to use one of the preset scan option settings, select the
option from the Job Type drop-down list (see "Adding Job Type
Settings" on page 87).
Click Default to restore the default setting for the scan options.
9. When you finish, click Scan to start scanning.
The status bar appears on the bottom left of the window to show you the
progress of the scan. To cancel scanning, click Cancel.
10. The scanned image appears.
If you want to edit the scanned image, use the toolbar (see "Using the
Image Manager" on page 88).
11. When you are finished, click Save on the toolbar.
12. Select the file directory where you want to save the image and enter the
file name.
13. Click Save.
Adding Job Type Settings
You can save your scan option settings for later use.
To save a new Job Type setting:
1. Change the options from the Scanner Properties window.
2. Click Save As.
3. Enter the name for your setting.
4. Click OK.
Your setting is added to the Saved Settings drop-down list.