Samsung NP-X22-K01-SEA - Manual (Page 84)

8
7
Enter the network authentication, data encryption
(WEP), encryption level, key index, and wireless
security password configured for the target access
point or computer-to-computer network in the
Security Settings window, and click
Next.
Note
The network authentication, data encryption
(WEP), key index, and password of a access point
are configured in the access point management
program.
For information on the security information, check
the security settings of the access point or ask your
wireless network administrator.
To connect to an existing computer-to-computer
(Ad Hoc) network, enter the password configured
when creating the computer-to-computer network
for the first time. You do not need to enter network
authentication or key index.
Note
Security Settings
■ Network authentication: The network
authentication option includes Open System and
Shared Key. When you select Open System, no
authentication is applied (however, encryption is
supported). When you select Shared Key, a WEP
key is used for authentication. The default setting
is Open System.
■ Data encryption (WEP): The IEEE 802.11 WEP
(Wired Equivalent Privacy) standard defines
two levels of encryption, a 64-bit key (this is
sometimes represented by 40bits) and a 128-bit
key.
■ Key index: Select the current encryption key
index used by the access point out of 1 to 4.
■ To use encryption key: Click Use pass phrase to
activate, and enter 5 (for 64-bit) or 13 (for 128-bit)
alphanumeric characters (represented by 0-9,
a-z, or A-Z).
8
The Done window appears, click OK.
When a wireless connection to an access point is
established, the connection icon ( ) appears in front
of the name of the connected profile.