Samsung NP-X22-K01-SEA - Manual (Page 89)

88
Sharing Internet Access
Set one computer as the sharing server and another computer as the client for two computers to share an Internet using
one Internet line. Once the configuration is complete, you can use the Internet immediately.
Note
If you perform Internet sharing setup by using Samsung Network Manager, the program must be installed into both
computers.
There are three methods for setting each computer as a sharing server and a client as shown in the table. This document
describes how to do so by giving an example to the typical connection method 1 ( Wire+Wireless).
Note
Sharing Server (Hereinafter referred to as server)
Computer that is equipped with two LANS and is directly connected to an Internet.
Sharing Client (Hereinafter referred to as client)
Computer that is not directly connected to the Internet and is able to use the Internet through the sharing server.
How to Connect the Client to the Server
Connection
Type
Network Device of the Server
Network Device
of
the Client
Check the connections before connecting to the
Internet.
Connection
Device to the
Internet
Connects to
the client.
Method1 Wired LAN Wireless LAN Wireless LAN
It is wireless-to-wireless connection. First turn on
the wireless LAN.
Method2 Wireless LAN Wired LAN Wired LAN It is wire-to-wire connection. First use the LAN
cable to connect two devices before setting the
computer.
In Method 3, you have to install the wired LAN
card for connection.
Method3 Wired LAN Wired LAN Wired LAN