Samsung NP-X22-K01-SEA - Manual (Page 92)

91
7
Click Add Printer and set up a printer following the
instructions in the wizard. Once the printer addition is
complete, click
Refresh.
Select a printer and click Finish.
Note
If you don’t want to add a printer, just click
Complete without following the instructions in the
wizard.
8
If the “ Do you want to move to the added location
now?” window appears, click No.
If the icon for the added location appear, it means
that the client configuration is complete.
If you click Yes, the computer connects to the
sharing server and you can immediately use the
Internet.
To connect to the Internet from the
Sharing Client
1
Check if the sharing server turns on because this
is mandatory. If you connect to the sharing server
through a wireless LAN, the wireless LAN of the
server must be turned on.
2
Run Samsung Network Manager on the sharing
client computer.
3
Click the icon for the location that has been set as
the sharing client in the Shared Location window and
click Go.
Once a message appears to inform you that moving
is complete, you can use the Internet. If the Internet
is disconnected during use, click
Wireless menus
> Reconnect Sharing in Samsung Network
Manager. Then, the network will be connected
again.