How to use the dispenser – Samsung RF4289HARS-XAA User Manual

Page 69

Advertising
background image

operating

_69

02

OPERA

TING

HOW TO uSE THE DISPENSER

Touch the dispenser status on the Home screen to
select the type of dispenser you want.
Place your cup under the ice outlet and push gently
against the dispenser lever.
Make sure the glass is in line with the dispenser to
prevent the ice from bouncing out.
When Cubed Ice is selected after using the Crushed
Ice feature, a small amount of residual crushed ice
might be produced.

Please wait 2 seconds before removing the
glass under the dispenser to prevent spills.

If the Refrigerator door opens, the Dispenser does not
work.

Water Dispenser Installation After installation, press

the dispenser arm for at least 2 minutes to remove
trapped air from the water line and to fill the water
system.

Do not pull the lever out.

You could damage or break the lever’s spring.

To clean the ice bin/bucket, wash with a mild

detergent, rinse well, and dry thoroughly it.
Do not use harsh or abrasive cleaners or solvents.

In case ice doesn’t come out, pull out the ice

bucket and press the test button located on the
right side of ice maker.

Do not press the test button continuously when

the tray is filled with ice or water.
Water may overflow or ice may jam the bucket.

Normal Use

To fill the ice bucket to maximum capacity after
installation, follow these steps:

1. Allow your refrigerator to operate and cool down

for 24 hours (or 1 full day).

- Waiting 24 hours will allow your ice maker to

cool properly.

2. Dispense 4 to 6 ice cubes into the glass.

3. After 8, and then 16 hours, dispense a full glass of

ice.

When you press the Test button, you will

hear the refrigerator chime (ding-dong).
When the chime sounds, release the Test
button.

The chime sounds automatically again to let you

know the ice maker is working well.

If a power failure occurs, ice cubes may melt
then freeze together when the power comes
back on, causing the dispenser to be out of
order.

To prevent this problem, after a power failure, pull out
the ice bucket and discard the residual ice or water.

After you dump the ice from the ice bucket,
you should press the dispenser lever once
with the ‘CUBED’ or ‘CRUSHED’ function
ON.

The ice maker will make new ice faster after you return
the ice bucket in the refrigerator.

If you use all the ice at once, you must repeat
Steps 2 and 3 on the previous page. However,
only wait 8 hours before dispensing the first 4
to 6 ice cubes. This will replenish the ice cubes
and ensure maximum ice production.

cAuTION

cAuTION

cAuTION

check the water
level

Test button

DA68-02520A(0.0)-EN.indd 69

2011.3.2 8:40:37 AM

Advertising