Samsung RF4289HARS-XAA - Manual (Page 8)

08_ setting up
3. Remove the 3 hex head bolts ( 7 ) attached to
the upper left and right door hinges with a socket
wrench (10mm).
Remove the ground screw (
8 ) attached to the
upper left and right door hinges with a philips
screwdriver (+). Remove the upper left and right
door hinges (
9 ).
4. Lift the door straight up to remove.
5. Remove the screw ( 10 ) attached to the lower left
and right door hinges with a philips screwdriver (+).
Remove the 2 hex head bolts (
11 ) attached to
the lower left and right door hinges with an allen
wrench (3/16”). Remove the lower left and right
door hinges (
12 ).
REATTAcHING THE REFRIGERATOR
DOORS
To reattach the fridge doors, assemble parts in reverse
order.
DISASSEMBLE THE FLEx DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
2. Take off the cover ( 2 ) w/harness with a flat-blade
screwdriver (-).
3. Disconnect the housing connector.
4. Remove 2 hex head bolts from sides with a socket
wrench (10mm).
5. Lift up the Flex door from the rails.
Allen wrench
12
10
11
Socket wrench
7
8
9
1
2
DA68-02520A(0.0)-EN.indd 8 2011.3.2 8:39:1 AM