Samsung NP-Q1-V000-SEA - Manual (Page 142)

142
Setting a User Password
Users can start the system with a user
password, but cannot enter the System
Setup. By doing this, you can prevent
other users from entering Setup.
Before configuring a user password, a
supervisor password must have been
configured. Deactivating the supervisor
password also deactivates the user pass-
word.
In the
Set User Password item, press
< Enter> and complete the procedures of
Step 3 of Setting a Supervisor Password.
Activating the Booting Password
Before activating the booting password,
a supervisor password must have been
configured.
Set the
Password on boot option to En-
abled. From now on, system booting will
not proceed without the password.
Deactivating the Password
1
On the password to be deactivated,
press < Enter>. For example, to de-
activate a supervisor password in
the Set Supervisor Password item,
press < Enter>.
2
In the Enter Current Password item,
enter the currently configured pass-
word and press < Enter>.
3
Leave the Enter New Password item
field empty, and press < Enter>.
4
Leave the Confirm New Password
field empty, and press < Enter>.
5
In the [ Setup Notice] window, press
< Enter>.
The password is deactivated.