Samsung NP-Q1-V000-SEA - Manual (Page 99)

99
5
Select Internet Direct Connection
and click the Next button.
6
Select the LAN device, setup the IP
address and click the Next button.
Select Device
Select a device to be connect-
ed to the Internet. Select either
Wired LAN or Wireless LAN.
IP Settings
To use a static IP address, fill in the
fields. For the IP address information,
ask your network administrator.
Obtain an IP address automatically
Select DHCP to use this option (automatic IP
setting).
7
Click Add Printer and set up a printer
according to the wizard. When the
printer has been added, click the
Refresh button, select the newly
added printer and then click the
Finish button.
To not add a printer, click the Fin-
ish button.
8
When the network settings are com-
plete, the ’ Do you want to move to
the newly added location now?’
message appears. Click the No
button.
An icon for the added location is
created. The network settings have
been completed.
If you select ’Yes’, the network set-
tings for the added location are
applied.
To add a new location, repeat the
procedures from Step 3 above.