Samsung NP-Q1-V000-SEA - Manual (Page 140)

140
Setting a Supervisor Password
A Supervisor Password is required to turn
the computer on or to start the System
Setup.
When setting a Supervisor Password,
users other than a supervisor cannot use
the computer.
1
Select the Security menu in the
BIOS Setup.
2
In the Set Supervisor Password
item, press < Enter>.
Setting a Boot Password
When setting a password, you have to enter a password to use the computer or enter the
BIOS Setup.
By configuring a password, you can restrict system access to authorized users only and pro-
tect data and files saved on the computer.
Do not lose or forget your password.
If you have forgotten your password, contact a Samsung service center. In this case,
a service fee will be charged.
For the setup buttons, refer to the description of ‘System Setup Buttons (Keys)’.
p138