Samsung NP-Q1-V000-SEA - Manual (Page 143)

143
1
Select the Boot menu in the BIOS
Setup.
2
Press < Enter> on the Boot Device
Priority item.
3
Use the u1 or u3 button to move a
booting device up.
4
Exit from the Boot menu by pressing
the u4 button and move to the Exit
> Exit Saving Changes menu using
the Joystick and press <Enter> to
save the settings and exit the setup.
Changing the Boot Priority
The default boot priority of your computer is the CD-ROM first, then a removable device and
then the hard disk drive in this order.
You can change the booting priority using the Boot menu of the System Setup. As an ex-
ample, the procedures to change the highest boot priority device to the hard disk drive are
described below.